Go to content

Accessories

Print the page

Accessories

Maintenance products

Image

Code

Description

Use


START-UP KIT

AC01380

START-UP KIT

•Fire Starter (50u)
•Stove paint 85g
•High quality gloves
•Digital moisture reader
•Glass cleaner 16.9 oz
•Double wall stove pipe probe thermometer


STOVE AND FURNACE CEMENT (300 mL - 10.1 FL.OZ.)

AC02540

STOVE AND FURNACE CEMENT (300 mL - 10.1 FL.OZ.)

Dries to seal cracks and joints to prevent smoke or air leaks. SBI Stove & Furnace Cement may be used in stoves, furnaces, boilers, fireplaces (all fuels), combustion chambers, firedoors, flue and chimney joints, brick linings, gasketing.


HEPA FILTER WITH SPARK ARRESTOR FOR ASH VACUUM (AC02582)

AC02581

HEPA FILTER WITH SPARK ARRESTOR FOR ASH VACUUM (AC02582)

This filter HEPA allows to trap effectively the small particles of dry waste. The air sucked up by the sweeper is filtered and cleared of a very big part of allergens, for a healthier air. Resistant and easy to clean, it is enough to shake it or to rinse to remove the impurities.


ASH VACUUM CLEANER

AC02582

ASH VACUUM CLEANER

Conforms to UL STD. 1017. Certified to CSA STD. C22.2 No. 243-10. Avoid ending prematurely the life of your vacuum cleaner by using the ideal tool to suck up the completely cooled ashes of your wood or pellet appliance. Designed almost exclusively for ash collection, this ash vacuum cleaner will offer several years of service with proper care. Power: 800 W.


ASH VACUUM CLEANER User guide

SOOTSTOP FABRIC PRE-FILTER WITH METAL FILTER FOR AC02582 ASH VACUUM

AC02584

SOOTSTOP FABRIC PRE-FILTER WITH METAL FILTER FOR AC02582 ASH VACUUM

For a greater longevity of the engine of your sweeper, add on your filter HEPA, it pre-filters cloth and metal sootstop. Specially designed to trap effectively the particles of very small sizes so fine and volatile as the ash, it will preserve all its power of suction in spite of the accumulation of dusts. Easy maintenance: shake it simply or wash it. Replace immediately if the fabric is damaged.


4'' PELLET STOVE CLEANING KIT

AC02714

4'' PELLET STOVE CLEANING KIT

THE KIT INCLUDES: A stainless steel bristled brush along with a long scraper featuring a tough steel blade and an ergonomic handle. Efficiently removes the hardened buildup on the burn pot surface and holes, as well as the outlet of the pellet supply auger housing. A 4" (102 mm) diameter chimney brush (1/4"-20 thread) with flexible rods allowing cleaning up to 10 feet (3.04 m). To ease maintenance of exhaust systems with offsets. A nylon bristled tapered brush with a long steel rod and a wooden handle. Ideal for tight spaces and diameters between 1" (25 mm) and 2 1/4" (57 mm). A glass cleaner (500 mL-16.9 fl.oz.). Used regularly, it prevents permanent stains on the glass.


WOHLER VIPER L 9412

AC02719

WOHLER VIPER L 9412

Including 1 x GRP rod 0.35"dia, 50 ft. long, 2 x stainless steel end-piece M10, 1 x GRP-star holder Ø1.1" and 1 x protection tube 31.5" long. Designed to clean prefab-chimneys and ventilation ducts. The rod can be pushed completely into the cavity and it's not necessary to screw short parts of a rod together. Therefore the work will be done much faster. Furthermore the transport and the operation of the compact viper is much easier than done by conventional methods. Also the cleaning attachments, stars and threaded brushes can be pushed much easier into the chimney than other stars because of the density of bristles, though they clean as effectively as normal stars. The VA flat wire, which is used in case of persistent dirt, has a cutting effect, different from the normal polyamide material. The possibility to fix three different stars at the end of the GRP rod at the same time, provides great flexibility when choosing the appropriate cleaning attachment for the tube to be cleaned (hardness, density of bristles, material).


WOHLER VIPER L 9412 User guide

6

AC04500

6" ROUND BRUSH WITH POLYPROPYLENE BRISTLES (3/8" NPT)

Ideal to prevent creosote build-up inside the chimney.


7

AC04501

7" ROUND BRUSH WITH POLYPROPYLENE BRISTLES (3/8" NPT)

Ideal to prevent creosote build-up inside the chimney.


5' PELLET STOVE FLEXIBLE ROD (1/4

AC04510

5' PELLET STOVE FLEXIBLE ROD (1/4"-20 THREAD)

Useful to sweep your pellet stove vent pipe.

Note: ¼"-20 thread and ¼"NPT are NOT compatible.


PULL RING (3/8

AC04511

PULL RING (3/8" NPT)

Useful to connect to brushes such as #AC04500, #AC04501, and #AC04502.


5' FIBREGLASS ROD (3/8'' NPT)

AC04513

5' FIBREGLASS ROD (3/8'' NPT)

Easy to assemble. Fiberglass rod. Finished with a heavy metal male and female fitting.


ADAPTOR (3/8'' NPT TO 1/4

AC04514

ADAPTOR (3/8'' NPT TO 1/4" FEM)

Ideal for connecting a 3/8" NPT male pipe thread to 1/4" NPT female thread.


KEVLAR THREAD WOOD STOVE AND FIREPLACE GLOVES

AC07820

KEVLAR THREAD WOOD STOVE AND FIREPLACE GLOVES

Recommended for a clean and safe use of any type of wood-burning appliance. Fire-resistant kevlar sewings.


19

AC07822

19" KEVLAR THREAD SEWN FIREPLACE GLOVES

Thermal protective gloves with long cuffs (19" or 48 cm):

  • Ideal for stove, fireplace and barbecue
  • Highly resistant to high temperatures
  • Genuine leather and kevlar seams for increased durability
  • Maximum protection against all heat sources (covers the entire forearm)
  • Strong and flexible glove with reinforcement at the level of the hand
  • One-sized with cotton lining for comfort
  • Practical leather support buckle

DRY CLEANING PAD

AC07824

DRY CLEANING PAD

Easily cleans the soot from glass without water.


WOOD APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

AC07825

WOOD APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

Recommended for cleaning the glass of any type of wood-burning appliance.


PELLET APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

AC07827

PELLET APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

Special formula recommended for glass cleaning of wood pellet-burning appliances.


GLASS CLEANER (236 mL - 8 FL.OZ.)

OA11430

GLASS CLEANER (236 mL - 8 FL.OZ.)

Recommended for cleaning the glass of any type of gas burning appliance.


SERVICE KIT FOR PSG FURNACE

PA08597

SERVICE KIT FOR PSG FURNACE

Tired of repeatedly going back at your customers’ house because you do not have the right part in hand to repair their furnace? You can not handle long delivery delays for your impatient customers? Be professional and get the new PSG wood furnace Emergency Kit. In a rigid tool box, you’ll find important components used for Caddy furnaces maintenance. All you have to do is replace the components when the time comes, without any stress or suffering, in order to keep your kit up to date. Say goodbye to multiple trips and unsatisfied customers. The discovery of the year for real Pros!


SERVICE KIT FOR PSG FURNACE User guide